SK101's latest activity
-
SK101 replied to the thread Low oil pressure warning..Well, now i am going to have to look when i change oil from now on. Hopefully its magnetic and i dont know because its never had filings... -
SK101 replied to the thread Rear brake line along frame 04 Silverado..i made a line, and by made i mean i brought a pre made line and made a j shape to go into the abs controller and then had the local shop...
-
Since I "discovered" ni-cop brake lines, I do all my own lines. It's cheap, easy to use, and very corrosion resistant. Combined with a...
-
SK101 replied to the thread Low oil pressure warning..Darn, i forgot about magnetic drain plugs. They used to be on all sorts of things
-
I have an '03 as well. Just last year I suddenly had lower oil pressure. Turned out to be an 10 cent O ring on the oil pick up tube...
-
To check for oil pickup tube o-ring problem, park the truck pointing downhill at a decent angle. Usually backing the rear tires up on a...
-
SK101 replied to the thread Rear brake line along frame 04 Silverado..yeah its guessing game for sure trying just to poke a line through
-
Did you check the oil for any of that glitter? Do you still have the oil filter to cut open? What engine? None of these engines had...
-
SK101 replied to the thread Low oil pressure warning..5.3/ no i wasnt smart enough to look at the oil before i dumped it. i could probably identify the oil filter and cut it open though
-
Last week the 03 Silverado 1500 gave a low pressure warning. I stopped, made sure nothing was leaking and drove home slowly the 3...
-
SK101 reacted to 4silverado's post in the thread Rear brake line along frame 04 Silverado. with
Like.
I had a shop replace that line on my 04. They made their own and ran it over the tank. Repair was cheaper than if they dropped the tank... -
SK101 replied to the thread Rear brake line along frame 04 Silverado..That makes sense, its been a bear trying to get through there. i managed it once and when i tried to form the U turn while lying under...
-
Has anyone here replaced the line from the ABS controller to the rear axle before? Pre formed lines or made your own? I am having...
-
SK101 replied to the thread U-Joint Fiasco.That sucks. You pay people to do it right, you can do it wrong yourself for free.
-
To I would wager you that you also have a 1415 style drive shaft and you installed a 1410 style u joint. The 1410 is about 10...
