Xionation's latest activity
-
XThe mounts you have there look like the ones for the pick up. My 2004 2500 uses these wishbone style mounts for the torsion key...
-
XDid quite a bit of work since my last post. Got the rear suspension back to stock last weekend and all the front lift stuff taken out...
-
XLooks like it sits on the lower part of the frame channel (pic from charm.li)
-
XVin has 5th letter K so it was 4wd from factory. The last picture on my post was the driver's side frame where the drop bracket...
-
XThis was the picture from when I had my diff pulled out. the only mounts are the 2 bolts on the passenger side to the aluminum bracket...
-
XLooking over your pictures again, it appears they removed the stock front crossmember and it was replaced with the aftermarket drop...
-
XFor gmt800's any lift kit I think under 8" usually the upper mount gets cut off the diff not the frame. at least thats how its usually...
-
XWhat I don't like about most lift kits, is they are for looks not function. If I lift it I want improved clearance, articulation, wheel...
-
XRead over the instructions, it looks like the driver's side diff mount location gets cut back about 1.5 inches and some area of the diff...
-
XNo idea on miles on the lift. Might be that kit but its hard to tell. The folks I bought it from inherited it from the son-in-law that...
-
XJust want to introduce myself here. Recently took ownership of a 2001 Chevy Suburban 2500 with the 6.0 engine and 4wd. Not sure what...
-
XXionation reacted to Mikloangelo's post in the thread Miklo's 2001 Silverado 2500HD Build Thread with
Like.
I only replaced the flexplate. Staying with stock TC for now. I think the spacer you are referencing is the one in the center... -
XXionation reacted to Mikloangelo's post in the thread Miklo's 2001 Silverado 2500HD Build Thread with Like.
While waiting for this and that before fully installing the engine. I decided to add a steam port vent in the water pump. I bought a...
-
XXionation reacted to Mikloangelo's post in the thread Miklo's 2001 Silverado 2500HD Build Thread with Like.
So life keeps happening and it has drastically slow me down. When I finally got a bit of time I had my neighbor help me guide in the...
-
XXionation reacted to Mikloangelo's post in the thread Miklo's 2001 Silverado 2500HD Build Thread with Like.
Accessories mostly done. I still haven't cleaned up the alternator, and im missing some bolts for the tensioner. I found a cheap new...
