Search results

  1. AuroraGirl

    1999 1500 RCLB 2WD Rear Brake Issues

    DO NOT LUBRICATE THE CABLES. unless you have a fully synthetic PTFE tye lubricant, anything else will probably swell/break it down Recommend the OEM brake hoses signifcantly over the aftermarket this is an OEM hose, but the aftermarket i had was a slightly smaller hose, shorter by an...
  2. AuroraGirl

    Putting fog lamp switch in a truck without them (2005 2500HD)

    Hi, I recently in november had to fix some mouse damage under my fuse box and thats why Im making this post, i was wondering what the fog lamp switch does if you install it without putting a fuse or relay in, and you simply just swap the cargo lamp switch out for a dual fog/cargo switch. My...
  3. AuroraGirl

    My first GMT800, 01 2500HD LQ4

    Remember you need a new belt
  4. AuroraGirl

    Rusty Fuel Lines: Replacing lines not enough

    Idk what they are either
  5. AuroraGirl

    Rusty Fuel Lines: Replacing lines not enough

    every gm product from this era had no problem like this, yet gm made it every gmt800 was susceptible. Impressive
  6. AuroraGirl

    2007 1500 Classic with 4.3L v6,

    98 iirc 4.3 changed to metric Machining
  7. AuroraGirl

    What CV Axle Are You Buying?

    Reminder: Plunge joints dont wear much, thats the inside joint by the axle. The outer CV is what wears. GM sells the CV joint as a stub with the boot , youd just have to regrease or at least seal the boot on the shaft and reassemble. I can get the directions to rebuild it if you want...
  8. AuroraGirl

    What CV Axle Are You Buying?

    pricy but if thats an OEM shaft thats good for a long time
  9. AuroraGirl

    What CV Axle Are You Buying?

    full CV axle is 26069244
  10. AuroraGirl

    Axles/ suspension

    NP241 (harder to find for squares) or a reclocked GMt400 one would work with square body axles , also a bit stronger than NP208 heres a square np208 Note, the np208 wouldnt require the front shaft to always spin like the np261/3 do (gmt800 later years have these cases) I think the early...
  11. AuroraGirl

    Axles/ suspension

    youd need to be looking for a high pinion because dana 44 from a squarebody are low pinion, and passenger drop, which means that using the front axle wears the teeth on the coast side not the drive side, so weaker and wears.
  12. AuroraGirl

    2011 Hydroboost swap

    That would be a C for Chassis kinda live data if you want the more accurate/specific live data inputs , for the EBTCM (ABS) system
  13. AuroraGirl

    2005 cruise control

    Check out the tail lamp ones specifically and look at them outside of the housing when on and then on the brake. The bulbs can fail partially and look okay outside but be a mess circuit wise with barely any chips working etc
  14. AuroraGirl

    2005 cruise control

    Trailer wiring fuses should be pulled to rule out some crossed circuits. When hooked to my trailer with bunked wiring,cruise will not engage with lights on, if you’re just driving the hot wire for charging a battery could be touching any of the other in the bundle and contributing to why it...
  15. AuroraGirl

    transfer case shift lever knob (np261)

    One could run a die on it and make threads presumably
  16. AuroraGirl

    transfer case shift lever knob (np261)

    Surprisingly not attached with a clip just a D shape kinda like some steering shafts , old column shift handles , knobs on radios etc
  17. AuroraGirl

    Pulling heavy with 04 2500 non HD?

    3.73 was standard on 2500HD at least in 2005, 4.10 optional. im glad mine came with it

Latest posts

Members online

No members online now.
Top