Search results

Anyone know the thread size for the fill plug on my 3/4 ton Yukon rear differential? Its a 2000 with the 9.5" ring gear. The square drive rounded out and I need to replace it. It looks to be around 1/2 NPT but not 100% sure. Thanks Edit: A 1/2" NPT plug fits in the hole.

Look up AM Auto Parts online. I bought my power mirrors for my '00 from them for about $170 shipped. The ones with signals were a little more but they had the best prices I found.

That was my thinking too. Why spend the extra money when its something I can do easily and cheap. I added plugs for the new wires I ran. If for any reason I need to take the mirror off again I like not having to cut and solder the wire, just simply unplug it.

The fit to the door is the same, but instead of 1 plug there are 2. I do not think either one of the plugs has the exact same pinout as the one on the truck already, but should be easy to repin. Then just run wire to the BCM under the dash for the turn signal inputs. I wired my own turn...

Looks good!

I would not run any less than what is recommended in any diff. I have seen gears weld together from low fluid.

I have my transfer case out and need to replace the gasket that goes in between the transfer case and the transmission. Anyone have a link or part number?

I have a TCI converter going in, just looking to see what else I need while I'm in there.

I will be changing the torque converter in my '00 Yukon XL. Its a 3/4 ton with the 6.0L and 4L80e. I mostly work with manual transmissions so I am not too familiar with autos. What should be replaced while I have the transmission out? I was thinking at least the rear seal for the driveshaft...

Thanks guys! It was a pretty simple project once all the details were sorted out. I think I have less than $20 in all the parts and wire too, which makes it economical too! :D Thank you. I have been lurking on a couple since I bought the truck in October of last year. I haven't had much...

I recently installed LEDs in the towing mirrors on my 2000 Yukon 2500. I also added LED puddle lights under them. I figured I would do a write up since this is a fairly new forum. Since my Yukon is a 2000 it did not have factory turn signal mirrors, so this process is how to add them to the...