Reply to thread

Message: <blockquote data-quote="someotherguy" data-source="post: 20049" data-attributes="member: 6178">08-06-2020 Blower motor resistor failed, and the fan is running full speed even with the key off!  Had to pull the fan cover down and disconnect the fan.  "Lifetime warranty" replacement (recommended; these seem to go bad frequently) from BWD purchased through Advance.. came without the new harness it's supposed to include.  A trip back to the store got it swapped out for another...which got the blower fan up and running correctly again.[ATTACH=full]1147[/ATTACH]07-07-2021 Airbag warning came on, but without a scanner that can read body codes, couldn't tell what the problem was - so I ordered a scanner that was kind of low cost (Launch CRP123) but should come in handy for other tasks, too.  Determined it was code B0104, "discard electronic front end sensor 2" - to be sure, I swapped the sensors side to side and the code did follow.[ATTACH=full]1148[/ATTACH][ATTACH=full]1149[/ATTACH][ATTACH=full]1150[/ATTACH]DO NOT TAUNT HAPPY FUN BALLOrdered and installed a new sensor and cleared the code, no more issues.Richard</blockquote>