Reply to thread

Message: <blockquote data-quote="jaydentruman" data-source="post: 20938" data-attributes="member: 11611">Ok so I have gotten underneath the truck and I can hear the encoder motor switching and it will successfully put the truck into low gearing. I can feel the actuator on the front differential moving as well. I don’t know if it’s going enough but when four wheel drive is selected it moves or at least tries. So I am assuming my ground and switches are ok. Does anyone have any more suggestions?I am going to put the truck on jack stands tomorrow and see if the front wheels/ driveshaft turn when trying to drive. It displays the same symptoms as when the clutches in the t case went but I don’t think that’s the case cause it was replaced 6 months ago with brand new clutches</blockquote>