IMO, if the pulsation is caused by a warped rotor that is far enough out of spec, do not machine, replace it and check the new rotor for runout. If the old rotor is machined, it is now thinner and more prone to warping easier again.
Brake rotor run-out and hub run-out
- Thread starter stutaeng
- Start date
stutaeng
Well-Known Member
I didn't work on this and spent time chipping some concrete on my driveway to repair some crappy overlay concrete and some ponding water. I had been holding that off for like 4 years now. Doh.
In the meantime, I decided to paint the sail panels on my SUVs. Did my 06 and the 04. I had bought a InoKraft Drizzle D1 and a Neiko minigun, neither of which I had used. I thought this was a perfect job for the minigun, but turned out to be junk. I got drips when I released the trigger. Tried to adjust the fluid control and nothing. When I was cleaning it, the paint was squirting out w/o me pulling the trigger. SMH
So I used the InoKraft and boy was I surprised! Sprays beautifully. No wonder the guys on YT rave about this gun. I'm gonna agree. Highly recommend it.
Paint is a single stage, 2 component "jet black" I bought when painted the roof racks of the 2 SUVs and windshield wipers of the SUVs and my Silverado.
Also the 06 had missing gaskets at the little louvers box under the sail panels, so I added some RTV silicone.
In the meantime, I decided to paint the sail panels on my SUVs. Did my 06 and the 04. I had bought a InoKraft Drizzle D1 and a Neiko minigun, neither of which I had used. I thought this was a perfect job for the minigun, but turned out to be junk. I got drips when I released the trigger. Tried to adjust the fluid control and nothing. When I was cleaning it, the paint was squirting out w/o me pulling the trigger. SMH
So I used the InoKraft and boy was I surprised! Sprays beautifully. No wonder the guys on YT rave about this gun. I'm gonna agree. Highly recommend it.
Paint is a single stage, 2 component "jet black" I bought when painted the roof racks of the 2 SUVs and windshield wipers of the SUVs and my Silverado.
Also the 06 had missing gaskets at the little louvers box under the sail panels, so I added some RTV silicone.
Attachments
Last edited:
stutaeng
Well-Known Member
Looks great @ORVietVet !
I popped the panels on the 06 in a hurry because it's my daily driver...not too shabby.
I'm still trying to pickup some experience and confidence to refinish my 99. At least the roof.
I popped the panels on the 06 in a hurry because it's my daily driver...not too shabby.
I'm still trying to pickup some experience and confidence to refinish my 99. At least the roof.
Attachments
Looks good. Anything is better than the factory flat black look.
Similar threads
