Reply to thread

Message: <blockquote data-quote="Erki" data-source="post: 16810" data-attributes="member: 216">Next I had planned to use the engine and everything from the k10. But i took the heads off and one cylinder was badly rusted and pitted. So I found another 305 that was running. Got the engine trans and transfercase in. Shortened the driveshaft and got that hooked up now. I'll get a proper one built later but for now i can at least test the rest of the vehicle and eventually move it around. Thats about where it sits for now. Need a few brake lines to the back, wite the engine, mak a shifter, then maybe I'll see if the transmission is any good. Also found a hood for it as the original was missing. [ATTACH=full]791[/ATTACH][ATTACH=full]792[/ATTACH][ATTACH=full]793[/ATTACH][ATTACH=full]794[/ATTACH][ATTACH=full]795[/ATTACH][ATTACH=full]796[/ATTACH][ATTACH=full]797[/ATTACH]The look I'll probably go with is clear coat again and if I can find some 33x12.50 15 tires id like to run the steel wheels.[ATTACH=full]798[/ATTACH]</blockquote>