Reply to thread

Message: <blockquote data-quote="Cadillacmak" data-source="post: 27908" data-attributes="member: 11338">Your transfer case for sure. No holes in it and fluid is good? Disconnect your battery, turn you key on and lights on. Wait 10 seconds and then turn your lights and key off and reconnect your battery and place the t-case in 4low with the transmission in neutral. If that works, go back to 4high and cycle through to 2x4. If this doesn't work, check your t-case module with a scanner and your t-case encoder motor. You can pull the encoder motor off the side on the tcase and shift manual, if that doesnt work you have an internal fail in the T-case.</blockquote>