Reply to thread

Message: <blockquote data-quote="someotherguy" data-source="post: 20904" data-attributes="member: 6178">I did all the steppers and bulbs in my 2006 cluster.  Also did the bulbs in the dual zone/automatic ("digital") A/C panel, and the steering wheel buttons.  IIRC the digital A/C panel has two different types of bulbs in it, 12V and 6VThe whole reason for this job is my fuel gauge stepper went bad during a battery cable replacement.  Figured since they're known for failure I did the whole thing.[ATTACH=full]1825[/ATTACH][ATTACH=full]1826[/ATTACH][ATTACH=full]1827[/ATTACH][ATTACH=full]1828[/ATTACH]This is the kit I used for my 2006 SS since it has the extra stepper for the transmission temperature: <a href="https://www.amazon.com/gp/product/B01J50FOBA" target="_blank">https://www.amazon.com/gp/product/B01J50FOBA</a>These are the "grain of rice" bulbs I used in the steering wheel buttons: <a href="https://www.amazon.com/gp/product/B00L8BR76A" target="_blank">https://www.amazon.com/gp/product/B00L8BR76A</a>And finally here's the climate control bulb kit; note that you have to pick auto or manual on the controls as the bulbs are different: <a href="https://taninautoelectronix.com/product/2003-2006-gmc-chevrolet-truck-diy-climate-control-bulb-kit/" target="_blank">https://taninautoelectronix.com/product/2003-2006-gmc-chevrolet-truck-diy-climate-control-bulb-kit/</a> - I wish I could remember the information source I used to determine which bulbs were which.  There's two circuit boards in the controls IIRC...sorry; don't have pics of doing that one, but it really wasn't a big deal. The only real PITA is the replacement bulbs for those small ones in the buttons and A/C controls don't come with the blue covers that give them the correct color; you have to carefully pull them off the old bulbs and transplant to the new.  Sometimes they're crispy which makes it tough.Richard</blockquote>