Reply to thread

Message: <blockquote data-quote="JorgeS" data-source="post: 27073" data-attributes="member: 12094">If your truck has the stability control system, which has two brake lines to the rear, one per side, you may want to have it done. I didn't want to tackle it, and when I took it to my favorite (small) shop the declined it.  Turns out that it took them a whole day to bleed the system on a previous truck; you need special equipment that puts the ABS/Stability pump into a bleed mode, and connects to all four corners. If you're going to do it yourself, avoid stainless (very hard to seal joints), and use NiCopp lines, which are easier to handle & seal, and don't corrode.</blockquote>