Reply to thread

Message: <blockquote data-quote="Harry Dawg" data-source="post: 29563" data-attributes="member: 13234">Sorry fellas. Here are some pics of the setup. I should have known that question was coming lol. [ATTACH=full]6339[/ATTACH][ATTACH=full]6340[/ATTACH][ATTACH=full]6341[/ATTACH][ATTACH=full]6342[/ATTACH]So basically I will just weld this <a href="https://www.homedepot.com/pep/Everbilt-6-in-x-24-in-16-Gauge-Plain-Steel-Sheet-Metal-1702/332734201?g_store=6839&source=shoppingads&locale=en-US&fp=ggl&pla_with_promotion&mtc=SHOPPING-BF-CDP-GGL-D25H-025_004_BUILDER_HARD-NA-Multi-NA-PMAX-NA-NA-NA-NA-NBR-NA-NA-NA-BuildersHardware_PrioTest3_National&cm_mmc=SHOPPING-BF-CDP-GGL-D25H-025_004_BUILDER_HARD-NA-Multi-NA-PMAX-NA-NA-NA-NA-NBR-NA-NA-NA-BuildersHardware_PrioTest3_National-23548698423--&gclsrc=aw.ds&gad_source=1&gad_campaignid=23558551435&gbraid=0AAAAADq61Uf_vSYAQCeIO_UU1n_ysJcji&gclid=Cj0KCQjwsMLSBhD9ARIsAIpUTDood34aXCm34WXHbkurED3grCZANKMDTeHUWhlkqT_yRkOkcmPsqagaAtqbEALw_wcB" target="_blank">sheet metal</a> to the outer tube of the cargo rack. Then drill 4 holes for the mounting bolts. I have access to a MIG welder only. No SMAW or FCAW, which probably would be too hot anyways as mentioned.It's to be used for camping while the vehicle is stationary and has some support poles that come down the ground when it's in use. I am more concerned with driving and the leverage that the thing will have on the mounting bracket during rough rodes, bounces etc.</blockquote>