Reply to thread

Message: <blockquote data-quote="INW-Iron-Steel" data-source="post: 23943" data-attributes="member: 11733">Here's a photo of the ground on the frame just behind the sway bar[ATTACH]3279[/ATTACH]Not the same vehicle, but same ground mod on another GMT800 a few years back. Including my 04, this is now the 4th GMT800 I have done this on. The ground in the harness often loses continuity over the years. I did it to mine not because the ground was bad, but because I was splicing in a new connector and didn't want to have to go back later. On the left is the vehicle side of the harness with ground spliced in. Right side is factory wire running to the AC coil.[ATTACH]3280[/ATTACH]</blockquote>