Reply to thread

Message: <blockquote data-quote="Mikloangelo" data-source="post: 27481" data-attributes="member: 13767">Haven't done much lately. I loaded my short block of the trailer to get ready to haul to the machinist on Friday. Hopefully will have it back within 2 weeks. I did however start on the engine bay wiring. I stripped the old wire loom and pvc wrap off the old wires, sprayed the wires with alcohol and cleaned them up. Then used a heat resistant fabric tape to re-wrap the harness. I wrapped the engine harness, but still have the fuse box harness, ECM harness, and headlamp harness to go. Once done wrapping I'll cover everything with wire loom. I bought a ton of ADEL clamps to mount all the harnesses once the engine is installed. <a href="https://a.co/d/00edAbW7" target="_blank">Link for Fabic Tape</a></blockquote>