Reply to thread

Message: <blockquote data-quote="Mikloangelo" data-source="post: 28910" data-attributes="member: 13767"><p>Also, I have a goal of removing the Quick disconnect lines from the transmission cooler side and the engine oil cooler side on the radiator. This will allow me to convert them to -AN fittings. 6AN on the transmission side and 8AN on the oil side. The trans side fittings are 5/8-18 inverted flare threads on the radiator (i believe). And on the oil side it is a M20x1.5 thread. The oil fitting is a bit different and havent seen any solutions online yet. I have a path im exploring but i need to find the correct adapter. The one I found is close but the AN adapter i have is incorrect. Will keep everyone updated. Im also considering going to a local machine shop just to have it made.</p></blockquote><p></p>