Reply to thread

Message: <blockquote data-quote="Mikloangelo" data-source="post: 29402" data-attributes="member: 13767">When Start the truck up it kind of sputters and takes a second for it idle out. I assumed it was that the fuel rail is losing pressure or not enough but the TBSS fuel rail has no Schrader valve to verify. So i decided to go on the internet for a solution so I can verify my fuel pressure.I found a QD adapter where you can screw in a pressure sensor or a gauge.  I went with the fuel pressure gauge so I can verify pressure before turning the key on. I pieced it together with some Loctite 565 and let it set overnight to cure. I put the contraption on the output of the C5 fuel pressure regulator before the C5 fuel feed hose that leads to the fuel rail. It fits cleanly under the intake manifold cover. So far it doesnt appear im losing pressure at the rails. <a href="https://a.co/d/0hUGfXXe" target="_blank">Link to Gauge</a><a href="https://a.co/d/0e0Ccv0D" target="_blank">Link to QD adapter</a></blockquote>