Reply to thread

Message: <blockquote data-quote="99Sierra2500" data-source="post: 29142" data-attributes="member: 12343">[H3]Steps 10-18:[/H3][ATTACH=full]6199[/ATTACH]The numbers below refer to the step numbers on the diagnostic table.    7.    If the TP indicated angle does not follow the movement of the throttle blade and no TP sensor DTCs are set, there is a mechanical condition with the throttle shaft or the TP sensor.    18.    Locating and repairing an individual condition may correct more than one DTC.</blockquote>