Reply to thread

Message: <blockquote data-quote="Kubs" data-source="post: 2960" data-attributes="member: 238">The fit to the door is the same, but instead of 1 plug there are 2.  I do not think either one of the plugs has the exact same pinout as the one on the truck already, but should be easy to repin.  Then just run wire to the BCM under the dash for the turn signal inputs.I wired my own turn signals for pretty cheap:<a href="http://www.gmt800.com/forum/showthread.php?t=169" target="_blank">http://www.gmt800.com/forum/showthread.php?t=169</a>The wires I used on the BCM for the turn signals are in there too.</blockquote>