Reply to thread

Message: <blockquote data-quote="ORVietVet" data-source="post: 22149" data-attributes="member: 9438">Ok, so today my AL friend dropped off her 2005 Tahoe LS for the brake pedal upper bushing. There was a severe rattle from the pedal, under dash area, when went over bumps.No pics from underneath because was just too crowded and there is a few videos at you tube to look at. Here is a link to a good one:[MEDIA=youtube]WO9ZZRMcM8o[/MEDIA]I took the driver's seat out and laid under there and reached up but was still very cramped. Hard to take apart the pivot bolt but all nut and bolts removed, including at seat, were thread chased and was way smoother going back together. The pivot bolt is 18mm at each end. The seat nuts at front take an E18 and the back bolts take an E14.I also installed a new brake light switch. Everything went to plan and was a 3 hour job.[ATTACH=full]2439[/ATTACH][ATTACH=full]2440[/ATTACH][ATTACH=full]2441[/ATTACH][ATTACH=full]2442[/ATTACH][ATTACH=full]2443[/ATTACH]</blockquote>