stutaeng's latest activity
-
Welcome to the forum, from Oregon. Like @stutaeng is saying, go to charm.li and find the wiring diagram and have at it. I would think... -
Welcome to the forum! There's a lot out there with swapping from a 4L60 to a 4L80. A well rebuilt and cared for 4L60 is plenty strong...
-
stutaeng replied to the thread Grandpa's '92 Dakota.Nice! How do you control that transmission? Standalone controller? Wouldn't it be cheaper to just find a good running 4L60e to keep the...
-
Lots going on in the personal life, but ultimately the oldest has backed out. He's not really interested in wrenching, and I'm not...
-
They may originally, BUT, who would still be using the original one? Should be changed/replaced every other oil change. The seal that is...
-
stutaeng replied to the thread Low oil pressure warning..I thought all of these vehicles had a factory magnetic drain bolt, no?
-
Darn, i forgot about magnetic drain plugs. They used to be on all sorts of things
-
A different guy at AA told me the external won't work on my four wheel truck because there's no room between front driveshaft and bell...
-
345965779304051332 August 21
-
stutaeng replied to the thread 01 5.3 incompatible with 03 NV4500.Interesting, although I don't know anything about manual transmissions. A few years ago I built a 6.0 from parts and my crank was from...
-
To check for oil pickup tube o-ring problem, park the truck pointing downhill at a decent angle. Usually backing the rear tires up on a...
-
Titulo limpiar? Me no think so !
-
I have an '03 as well. Just last year I suddenly had lower oil pressure. Turned out to be an 10 cent O ring on the oil pick up tube...
-
I really appreciate all the info here. I think the hydraulics is usually what causes the gears to fail. Lack of fluid/pressure is a...
-
