Search results

  1. T

    Seat hunting

    I did my covers about a month ago, a stock cloth cover swap in my 07 and it was super simple. I got some power seats real cheap and swapped all the covers over to my manual seats... The "new" seats were from an older truck, so none of the airbag connectors matched up and my truck isn't wired...
  2. T

    Southern California 2003 Silverado SS

    It should have been the 4L80E From the factory... much more durable and I think the closer gear ratios in the 80 are better Great color on that... would be nice to see a video with some blower whine :)
  3. T

    Key Locks

    i would also say if you don't have passenger door key locks, then you should have fobs...
  4. T

    Key Locks

    Most likely it doesn't have passenger door locks just to save a few bux in manufacturing. There is a whole thread discussing deleted items to save $$. EX: my truck not having an ignition key steering lock.. My 07 has a fob/electric locks, but no passenger door key lock. they figure why put in...
  5. T

    Truck wants to start on the first ignition turn 5.3

    when i swapped the motor in my 07, not having all the grounds connected caused very odd cranks... truck wouldn't run without the headlights on, then it wouldn't shut off without turning off the lights... ignition key did not always operate correctly... dash and displays did not operate...
  6. T

    Another New Guy

    I've already done this... this was meant for the OP. OP asked me for sticker info.
  7. T

    Another New Guy

    No stickers with any info on the door jambs.. these two were behind the seat on driver side
  8. T

    Another New Guy

    which info? i'll have to look
  9. T

    Another New Guy

    Yeah thats the way all these trucks were sold, as cab and chassis, 2wd only. then they went to upfitters for the rest. Mine was a Verizon bucket truck and has a Verizon RPO when decode the VIN. Even the rare "factory" quad cab trucks all decode to 2dr trucks. They were also sent out after being...
  10. T

    Another New Guy

    these trucks are just GMT400's on steroids.. they can really haul some weight.. they are rated for 15,000lbs but seem to be able to handle a lot more from the stories i've seen. and unless you get some weight in the back, they quickly let your back know they're not your average home depot...
  11. T

    Another New Guy

    if you are on Facebook this is a pretty active group for the 3500HD/GMT455 https://mobile.facebook.com/groups/3500hd/
  12. T

    Another New Guy

    nothing other than a pinhole leak in the cover.. i just put some jb weld on it.. you could have a cover or pinion seal leak like any other differential
  13. T

    Another New Guy

    i've got an 01 3500HD as well... workshop manuals are only on EBAY for the most part... and expensive.. but there really isnt much different to working on these vs a "regular" 3500. the only real difference is the I-beam axle with kingpin steering, the dana 80 rear and 120lb 19.5 wheels/tires
  14. T

    Hard To Find or Discontinued Parts?

    @mars2878 where you in MA.. may need a part or 2 in the future.. I'm near 495/pike interchange (Medway) @black_03_dakota welcome to the forum.. funny I picked up my 07 Silverado classic to replace an HHR as well.. I loved the HHR, but the engine went out on me. a split oil filter (early tsb...
  15. T

    Aftermarket for the 8.1L

    What are you looking for, s there something you cant find?
  16. T

    2007 1500 Classic with 4.3L v6,

    yep... little emory cloth and quick shoe lace polish on the journals, add some new bearings, it would for sure.. top end is fine, cross hatch still in the cylinders..
  17. T

    2007 1500 Classic with 4.3L v6,

    No, i swapped it out.. would need a new crank and rods for sure. I'm just looking at it for fun.
  18. T

    2007 1500 Classic with 4.3L v6,

    Quick autopsy on the old 4.3... Some dark looking rods.. leading to some crusty crank rod surfaces .... throw some new bearings in, she'll be fine ;-) was interesting to see that GM used the "broken rod caps" on these motors
  19. T

    2007 1500 Classic with 4.3L v6,

    Engine is in and running good, no CEL on dash, runs nice and smooth. One minor slip up on the motor mounts, I didnt swap the adapter plates on the block which pushed the tail-shaft to the right... must have been a 4x4 truck that the "new" motor came out of. I also missed one ground at the...
  20. T

    2007 1500 Classic with 4.3L v6,

    this engine wont rotate, so i only have a 1/2" gap between the block and flexplate to get at the bolts..

Random media

After
20210722_120425
IMAG0193
IMAG1273 1
20140726 182144
Another view of depo heads with black bumper lights
IMAG1145 (1)
IMG 20140424 180220

Latest posts

Members online

No members online now.
Total: 108 (members: 0, guests: 108)
Top