Reply to thread

Message: <blockquote data-quote="2003tahoe" data-source="post: 4279" data-attributes="member: 145">PART 2: Automatic A/C ControlsTo start this off you will need all the items in the first picture in this thread except the fork also you will need a 1/4 dr ratchet set and 12 leds and 12-3 resistors. To start this led mod you will need to take the dash cover off as in picture 2 at the start of this thread. when you get the cover off the dash you will need to take 2 screws out 1 on each side they are 7mm,[ATTACH]190[/ATTACH] when you get these out you will notice it wont come out that is because there are 4 tabs, 1 on top and 1 on bottom of the screw that you just took out, for this you can use your nails or screwdriver to pop these out.[ATTACH]189[/ATTACH] When you take care of that you will need to unplug the connectors on the back of the module. I noticed that you can use one finger and press on the top of the driver side connector and it will come out then you can get your hand in and disconnect the passenger side connector.[ATTACH]191[/ATTACH]</blockquote>