Reply to thread

Message: <blockquote data-quote="burgundybeast04" data-source="post: 2652" data-attributes="member: 73"><p>So I got my led switchbacks for my turn signals today and attempted to install. Did not go well. The LEDs are supposed to flash amber for the turn signal and turn to white when I have my parking light on (low element). Well I wired the resistors in properly (tap in to ground and turn signal wire) and I put the led bulb in. When I signal the amber color stays on constant while the white light flashes with the signal. And if I disconnect the resistor the amber hyper flashes while the white remains off. If I rotate the bulb 180* it doesn't work at all. Anybody ever done this before? So confused right now.</p></blockquote><p></p>