Reply to thread

Message: <blockquote data-quote="AuroraGirl" data-source="post: 26461" data-attributes="member: 9417">Reminder: Plunge joints dont wear much, thats the inside joint by the axle. The outer CV is what wears. GM sells the CV joint as a stub with the boot , youd just have to regrease or at least seal the boot on the shaft and reassemble. I can get the directions to rebuild it if you want [ATTACH=full]4785[/ATTACH]<table style='width: 100%'><tr><th> </th><th></th></tr><tr><td>(1) </td><td>Tripot Housing Assembly </td></tr><tr><td>(2) </td><td>Spacer Ring </td></tr><tr><td>(3) </td><td>Tripot Joint Spider Assembly </td></tr><tr><td>(4) </td><td>Swage Ring </td></tr><tr><td>(5) </td><td>Tripot Joint Boot </td></tr><tr><td>(6) </td><td>Small Boot Retaining Clamp </td></tr><tr><td>(7) </td><td>Halfshaft Boot Cover (Optional) </td></tr><tr><td>(8) </td><td>Halfshaft Bar </td></tr><tr><td>(9) </td><td>Small Boot Retaining Clamp </td></tr><tr><td>(10) </td><td>CV Joint Boot </td></tr><tr><td>(11) </td><td>Swage Ring </td></tr><tr><td>(12) </td><td>Race Retaining Ring </td></tr><tr><td>(13) </td><td>Ball </td></tr><tr><td>(14) </td><td>CV Joint Inner Race </td></tr><tr><td>(15) </td><td>CV Joint Cage </td></tr><tr><td>(16) </td><td>CV Joint Outer Race </td></tr></table>[ATTACH=full]4786[/ATTACH][ATTACH=full]4787[/ATTACH][ATTACH=full]4788[/ATTACH][ATTACH=full]4789[/ATTACH][ATTACH=full]4790[/ATTACH]Loosen the bolts and remove the halfshaft assembly from the tool.</blockquote>