99Sierra2500's latest activity
-
99Sierra2500 reacted to Mikloangelo's post in the thread Miklo's 2001 Silverado 2500HD Build Thread with
Like.
Absolutely. Ready to see how much horse power it actually has and the final sound after I finish the exhaust. -
Well, as my luck would have it, just as I'm about to finish putting my Tahoe back together, all of a sudden I get a call from my brother...
-
Upper intermediate shaft and Wolff bearing installed today = big improvement. Going to take it for an alignment next week & going to...
-
99Sierra2500 reacted to 5202500HD's post in the thread Cig lighter and DLC off with key mod with Like.
Ok so under the hood on drivers side main fuse/relay box I have a 15AMP Cig. Lighter Fuse and a 20amp Aux. fuse. What I'd like to do is...
-
99Sierra2500 reacted to Mikloangelo's post in the thread Miklo's 2001 Silverado 2500HD Build Thread with Like.
She's Alive! Got a basic tune in it for now. No leaks so far. Sounds great. No muffler or exhaust past the Y-pipe yet. Tuner will have...
-
It's right there and a PITA to get to. If I am gonna cram in that far to do that bottom column bearing, the cross bolt it hangs on is...
-
The trans pump should still run in neutral but the rpm’s might drop too far and thus be insufficient lube potentially , but I’d be more...
-
Thank you for your replies! You're right about that one cable going to the transmission... Not sure how I got that confused. As far as...
-
I'm curious as to why you were coasting down a hill in the first place. Was there an issue? As a general rule you should not coast an...
-
Got some car ramps a few months back and crawled under the Burb. Plenty of room to work. I have a trans fluid and filter change coming...
-
You can unbolt the bracket that holds the linkage to the side and pop the end of the linkage off and move away for clearance. On the...
-
Damn @ORVietVet I really appreciate the help.. I feel like this should be pinned somewhere! It’s not the shallow pan, so that’s...
-
If you are unsure about the clearance, I would borrow or rent a floor jack, just in case. Sometimes you have to use small blocks of wood...
-
Also, post a pic of the bottom of the pan. To be sure of shallow or deep. Makes a difference on the filter. If the vehicle has rusted...
-
Thanks Stu. I blew in the solenoid and it was closed I could take a vac guage/pump to it this weekend Appreciate the info.. I’m...
Members online
No members online now.