3linkedchevy
Well-Known Member
Alright, new issue has risen. So a couple weeks ago I noticed the heat wasn't getting as hot as it used to, checked coolant and all was good. Didn't stress about it too much, fast forward to a couple days ago, the AC stopped blowing super cold. It blows a little cooler than the inside temp, and when you switch it to heat, it blows a little warmer than inside temp.
It blows in all the different areas (feet, face, defrost) like normal, just no extreme cold or hot like there was. Now is this a blend door actuator issue or a possible control panel issue?
Oh, and to add, I replaced the compressor October of 2014 and had it professionally charged and checked for leaks. And it was literally good up until the last 2 weeks.
It blows in all the different areas (feet, face, defrost) like normal, just no extreme cold or hot like there was. Now is this a blend door actuator issue or a possible control panel issue?
Oh, and to add, I replaced the compressor October of 2014 and had it professionally charged and checked for leaks. And it was literally good up until the last 2 weeks.